lebtech

Im gonna be installing this cam soon and I have a few questions. I see all these guys making around 300Hp to the wheels after this cam install . I already have that with my current mods. So am I crazy or what? are there any graphs out there that show this cam making a solid 25-30rwhp ....or more with some decked heads and a valve job? I definetly dont wanna do all this work and loose power or have minimal gains like 10hp... Sorry if this sounds crazy but I know you guys have quite a bit of knowledge on here . THanks

dmelvin

iTrader: (8)

Most of the threads about guys doing this cam are from the NBS style, not the NNBS. That being said. It's still going to help you. Especially since you've got the long tubes to help with exhaust scaveging and the K&N to help it breath easier. A lot of it is in the tune, but I would think it would push you up around 330HP 350Ft/lbs if you run on the same dyno.

1FastBrick

iTrader: (17)

https://www.performancetrucks.net/fo...oughts-435536/

shupe

iTrader: (7)

You'll like it! I did.

Sales4@Texas-Speed

iTrader: (3)

Regardless of what "everyone else" is making, the cam should still pick up 20ish rwhp over a stock cam.