boost27

iTrader: (3)

I looking for a fitting for my transmission 1/4 NPSM to -6AN 90. I have a straight, trying to run my transmission line but I can get a 90 hose on because of the trans tunnel. 4l80e shoehorned 1gen jimmy.

Blown06

iTrader: (32)

Might give any of the sponsor transmission guys a call. They will have what you need. I got mine from FLT.

Remember the rear fitting is special and uses an extension off the fitting inside the trans. Would hate to see you burn your **** up.

oakley6575

iTrader: (5)

Depends on what core is used. 1997 and later use that fitting you are talking about since they moved the rear cooler port further back in the case for center lubrication. You don't use that fitting if you have the 1991-1996.

Razor

iTrader: (1)

-6AN 4L80E GM transmission cooler fittings - Sweet Performance Products, Inc - (Powered by CubeCart)

gmc6.0

That's where I got mine from

Razor

iTrader: (1)

Me too. Work great.

OP, might have to drop the transmission down to install the lines.

OR,

BFH tunnel clearance.

smoggist

I believe tci also makes the same style of fittings. That's what im using anyway. Can't think of the part # off the top of my head tho.

boost27

iTrader: (3)

I found some low profile ons on ebay. Bango fittings and they worked out great http://i.ebayimg.com/00/s/MTYwMFgxNjAw/z/v54AAOSwbqpTw3HI/$_35.JPG