oakley6575

iTrader: (5)

Does anyone know where I can find any/all dimensions on a 14 bolt 9.5" rear end? I'm trying to draw this up in Solidworks, but having a hard time with dimensions. Thanks

1FastBrick

iTrader: (17)

Do you have acess to any digitiseing equipment???

oakley6575

iTrader: (5)

I don't have a 14 bolt in front of me to measure on. If I did, I wouldn't have a problem

1FastBrick

iTrader: (17)

Do you have the equipment to make a 3d model???

oakley6575

iTrader: (5)

Are these serious questions? I'm so confused.

I'm drawing a 14 bolt in Solidworks. I am wondering if someone has any kind of dimensions off of a 14 bolt rear. Just like the original post states

1FastBrick

iTrader: (17)

Yes, these are serious questions. There are no known 3D models or other Cad files for the 14 bolt 9.5 rear end. At least no publicly known. I looked for quite some time.

If you have access to digitizing equipment you would be able to make a file.

I have the center section and I would be willing to loan it out in return for a copy of the file and deminsions.

oakley6575

iTrader: (5)

This is a project that I am drawing up by hand in Solidworks. I'm not using digitizing equipment, just dimensions to draw this rear end up the best I can. I'm building an assembly of a complete 14 bolt. Housing, cover, axles, pinion, pinion ring, pinion yoke, seals, bearings, bolts, perches, ect.

Again, all i'm looking for are dimensions. For example, perch to perch, total housing length, axle length, with diameters, axle tube diameters, ect.

1FastBrick

iTrader: (17)

The axle length is different for each model and so it the housing configuration but I do have those basic demension.

Yes, I know what Solid Works is. I work with CAD software and CNC equipment Every day.

Here is some basic measurements with pictures related to this topic.

https://www.performancetrucks.net/fo...thread-467473/

oakley6575

iTrader: (5)

Thanks, those will help. Looks like the only way to get accurate precise dimensions of everything on the 14 bolt is the have one in front of me.

1FastBrick

iTrader: (17)

Pretty much. Was there a specific year or model that you wanted demensions from???