updated tune + dyno tuning finally a good numbers
#1
TECH Apprentice
Thread Starter
updated tune + dyno run . 5.3 363hp - 342 tq cam only
for everyone to know what it was before i change things around :
04 5.3 bolt on + big cam , under 290hp ?
i was frustrated and a little bit angry at the same time but i sit my mind to make new plan ( 1 7/8 LTs Kooks + 3" ORY - used 799 heads - Edelbrock 90mm tb - slp crank pulley - e-fans ) .
i would like to thank so many people here and over ls1truck but especially beau from texas speed a great guy to do business and have solution for every thing , and oakley6575 for helpful input and answers to my problems , my tuner ryan abo sandok for a tremendous work on my truck he did one hill of a jop to tame it right .
we have faced leaking exhaust + one fan didn't work for some time + a hot weather that hit 96.8F ,
the base tune without dyno run ( Pic ) :
tuning pics :
Vid :
04 sierra on dyno 353 hp 338 tq - YouTube
Thanks a lot for reading
04 5.3 bolt on + big cam , under 290hp ?
i was frustrated and a little bit angry at the same time but i sit my mind to make new plan ( 1 7/8 LTs Kooks + 3" ORY - used 799 heads - Edelbrock 90mm tb - slp crank pulley - e-fans ) .
i would like to thank so many people here and over ls1truck but especially beau from texas speed a great guy to do business and have solution for every thing , and oakley6575 for helpful input and answers to my problems , my tuner ryan abo sandok for a tremendous work on my truck he did one hill of a jop to tame it right .
we have faced leaking exhaust + one fan didn't work for some time + a hot weather that hit 96.8F ,
the base tune without dyno run ( Pic ) :
tuning pics :
Vid :
04 sierra on dyno 353 hp 338 tq - YouTube
Thanks a lot for reading
Last edited by Boost-freak; 07-20-2014 at 01:55 PM.
#3
what where the exact mods before this? you gained a total of 70hp to the wheels with the heads pulley headers tb and fans? what was done to the heads? its a real nice gain id like to get some good info on this
#4
TECH Apprentice
Thread Starter
Looks like it makes some decent power.
josueh957
what where exact mods before this?
you gained a total of 70hp to the wheels with the heads pulley headers tb and fans?
the heads are stock 799 without milling or any type of work on them .
#6
TECH Apprentice
Thread Starter
yes you need to do that to complete the turn over for great results or you can pp and mill the heads for greater result ,
update
this thing pull hard but in a N\A setup you may need 3300+ converter and 4.10
next is trick turbo kit + genx 215 heads + Vic jr if needed ( 90% )
update
this thing pull hard but in a N\A setup you may need 3300+ converter and 4.10
next is trick turbo kit + genx 215 heads + Vic jr if needed ( 90% )
Last edited by Boost-freak; 07-11-2014 at 12:38 AM.
#7
On The Tree
iTrader: (32)
Join Date: Nov 2008
Location: A-Town, Ill side
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
This is GREAT news to me. I have currently, almost the same combo as your old setup. I have 799 heads that have been ported, and will be milled, and a Yank SS3600 that will be going in soon because of my disappointment with 313 on the dyno. Congrats on the pick up in hp.
Trending Topics
#8
TECH Apprentice
Thread Starter
This is GREAT news to me. I have currently, almost the same combo as your old setup. I have 799 heads that have been ported, and will be milled, and a Yank SS3600 that will be going in soon because of my disappointment with 313 on the dyno. Congrats on the pick up in hp.
thanks bud ,
i think you will gain more than me ,
my heads are stock untouched so you may see more gain
pm me when finish it up .
Thread
Thread Starter
Forum
Replies
Last Post
FlowmasterMufflers
Ford Engine & Exhaust Performance
0
07-22-2015 01:29 PM
FlowmasterMufflers
Foreign Performance Discussion
0
07-09-2015 12:23 PM
FlowmasterMufflers
Foreign Performance Discussion
0
07-09-2015 12:00 PM