mhorn0817

Truck is in sig and pull was made at 8psi. Truck made 380hp. I was thinking closer to 500. Am i off in assuming it should be that much more or is 380 normal

gamble686

iTrader: (3)

No offense to BlackBear but anything other than a live tune isn't going to be ideal for your setup. I am guessing it's very conservative. What all is done to your motor?

mhorn0817

Sorry this is after a dynotune by a very reptuable tuner in my area that speacilizes in LS motors

JordanH

iTrader: (16)

something is off for sure... I would expecting no less than 450 across the board. Maybe check with a different tuner

blown02408

iTrader: (4)

For 8psi on a stock motor it sounds about right to me, especially with a safe tune.

USMCvet0311

Take it to the track. I wouldn't get caught up on those numbers. Nice build though, I would expect at least 450 to the tires for sure.

mhorn0817

see this is my confusion. some people say the number is right and other say it should be higher. the tuner is a reputable LS motor tuner, cam only cars are always 400rwhp so he knows his stuff.

i though it should be higher, i was thinking 500 at 10psi. but ive been trying to research and see peoples setups and the power theyre making.

FFDP

iTrader: (2)

Too bad you can't post the tune here, because we can only take your word for him being a reputable LS tuner. Who knows, the tune might be junk but we will never know.

mhorn0817

yeah sorry i wish i could.

George C....

Mustang dyno?

Who is tuner? Ed hutchkins?