outlawz2004

iTrader: (18)

Will a 98 4L60e fit in my 04, if so will anything need to be changed for it to work right. I have a little over 146,000 hard miles on my stock trans, and it slipped bad today.LOL. It slipped bad once with moderate acceleration from a stop when it shifted to second. Then later, I tried a WOT from about 40mph and it slipped bad again. Normal acceleration seems to be fine. I guess anyday now it is toast. Well, my bro in law has an almost new trans in his 98 that he wrecked shortly after putting it in that I can get for cheap so hopefully it will work in my 04.

TIM Z

iTrader: (12)

The LSx 4L60e's have a perimeter bell housing. Not sure if its removeable or not.

If you can get a bellhousing adaptor it should work. Just make sure the harness plug is the same.

dirt track racer 81

iTrader: (45)

Some one correct me if Im wrong but I though the converter splines where different...

outlawz2004

iTrader: (18)

bump for anymore info.

dlt76028

iTrader: (13)

not sure the reason, but I've asked my trans builder and he said no. prob bellhousing...

outlawz2004

iTrader: (18)

thanks for the reply. I kinda figured that, but I have heard it would fit somewhere else but the info wasnt very reliable.

james8997

the input shaft, pump are different so no it wont work. sorry buddy