shortbedguy

a couple months ago I went adams motorsports partk where they have time attack on Tuesdays nights and I'm hook for 60 bucks you get 3 hours of non-stop adrenaline rush here is video youtube.*
Right after that I started collecting part off of Craigslist

I got use set for Jesse James wheel 20x10 with Tires there 28 inches tall not a good combination with a 5-speed and 410 gears. I found a first gen rear end with 307 Gears

shortbedguy

1st gen rear end with 3.07 gear and engine rebuild kit with 40 over pistons

shortbedguy

installed the jesse james wheels and lower the front 2". I'm going to drop the rear about 10"

shortbedguy

5

1st gen rear end 2nd gen hubs 3rd Gen front disc brakes on the rear.




Modified the fifth wheel hitch started on the 4 link

shortbedguy

I used for first time pantograh.


Reusing the leaf spring bushings

shortbedguy

DRAENOR

Nice. Other plan for the engine besides new pistons?

shortbedguy

made this ram air hood to day

dantheman1540

I know this is off topic but have you ever done a 6.4 powerstroke rcsb? preferably manual and 4x4 and if so how much do they cost?

shortbedguy

No I haven't but can $900+parts