FlowmasterMufflers

Available April 1st!

hemi-fi

Does it have the stock 2 1/4" outlets?

FlowmasterMufflers

Yes. This is a direct-fit replacement for trucks that were fitted with factory dual tailpipes. The factory muffler is band-clamped in place and this muffler assembly icludes the necessary inlet pipe and hangers to fit directly in place of the original muffler without cutting or welding.

hemi-fi

Seems like a good design, however I wish someone would make a true dual 2 1/2" exhaust system for these Rams, as I believe these Hemi's need more exhaust flow. I'm running a true dual 2 1/2" system on my Hemi powered Dakota and it laid down 315rwhp, with a stock 2006 5.7 Hemi and normally Hemi powered Rams only lay down about 245rwhp.

FlowmasterMufflers

I can see where you're coming from. We developed this kit as a lower cost option to a full Cat-back system, with many of the same benefits.

hemi-fi

Those are good numbers, the Eagle Hemi has a lot more power than the earlier version, such as mine.

Budakane

So basically it's a Si/DO 10 series muffler...

FlowmasterMufflers

No. This is actually an application specific, specially-designed version of our Outlaw Series straight-through mufflers. The internal configuration is similar to our Outlaw muffler design, but inside of a rectangular case.

FlowmasterMufflers

Mike@Flowmaster

Thinking about picking up one of our Direct-Fit American Thunder or Direct-Fit Outlaw mufflers for your 09-15 RAM 1500 5.7L?

Black Friday is the perfect time. We'll be offering the lowest pricing of the year starting November 27th at 12:01 AM PST.

Keep an eye on www.FlowmasterMufflers.com or call in at 707-544-4761.