Post up your best 60' on street tires. I know street tires and 60 ft's don't mix, but I'm interested in seeing what 60' people are able to cut with them.

What...
torque converter?
gear ratio?
Wheel/tire combo?

1.95 w/ 3800 converter, 4.11 gears.

265/70 R16 micheline truck tires

2.2, 255/55/16 summitomo htrz's on stock 16s. stock 3.42s open diff, stock trans, 4.8 ext cab.

2.1
stock 60 verter
4.10s
245 60 shitty raptor tires

1.67 Stock 2wd take offs 245/65 16. Stock 4l80e converter STS/6.0

1.63. Consistent 1.6's now on the gas.

2.0 3.73 with the mods in sig

2.08
6spd Manual
3.15 Gear
Stock rims with 255/45R18 tires

1.9 295/40/20, 3200 stall, 4.10s

1.57 on a set of new Ventus's 3.73 :P

There are some damn good 60fts in here for street tires.

LMAO most of you guys pulled a better 60 on skreet tires then I did on some junked et streets...

So my 60' isn't that bad. It seems 1.9-2.1 is average and those cutting lower are 4wd. I need to get some slicks to cut a good 60' and watch my ET drop. I ran against a nice Silverado the other night with a 2600 stall on 20's and he cut a 1.89. I forgot his gear ratio and tire size.

My best 60' 1.94

TT3000
3.42
275/55/17

1.82 on 275/50/20 dunlop sport maxx

1.82 on 275/50/20 dunlop sport maxx

Is your truck the one I ran at Irwindale on Thurs?

damm bro shoulda hit me up when you rolled to irwindale-next time let me know ill roll with you

2.54 sec. :jest:

Stock converter, 3.73s, 265/75R16 Bridgestone Duelers. :lol:

Is your truck the one I ran at Irwindale on Thurs?

Yes sir thats me im going to race a supercharged silverado ss next thursday

Yes sir thats me im going to race a supercharged silverado ss next thursday

your probably talking about greg , his should be running pretty good now with the 408 . i have a few other ss trucks i want to get down there again . how many pt.net guys have been going now?

your probably talking about greg , his should be running pretty good now with the 408 . i have a few other ss trucks i want to get down there again . how many pt.net guys have been going now?

Im out there like ever thursday

Last time I was there I ran into another member and that was 2 weeks ago

ill also add one of mine , 1.60 on some 275/40/17 nittos.

but that is awd , you should have asked people to list 2wd/4wd/awd

i may see you guys out at irwindale one of these days . ive only been there one or two times and got all of three runs in , for some reason that track is slower for me compared to autoclub dragway in fontucky.

Ya it may not be the best track but for 20 bucks and 4 to 5 runs you can't beat it

Nice kill we should do a pt.net track meet one of these thursdays

Three weeks ago i ran a pullied lightning and beat him twice he could not beleave my truck was just a bolt on 6.0 the lightning was pushing 435 rwhp 525rwtq with drag radials i was on 20'' with street tires
__________________

I ran about the same at Irwindale as I did in Fontucky the weekend prior. The DA was a lot better at Irwindale so I could see you have a valid point 2004ss about running better at Fontana. As for the 2wd/awd, good point, but it seems pretty obvious who's 2wd and who's awd with the 60's listed.

siktruk, it was a last minute trip up there. Next time I'll let you know, don't plan on running until I get some decent tires though.

06Fast what was your best that night? My truck ended up doing better after we ran, but still traction is impossible unless I'm real easy on it. Your truck moved good, I think we both surprised each other at first ha.

My best time was 8.43 @ 82.17

2.21 2wd

1.78 60' on 20" BFG KDWII . foose wheels, full weight
3600 Edge Stall, 4.11 gears
edit: and that was n/a

My best time was 5.433 @ 82.17

I'm assuming there is a type-o here. Maybe 8.433 @ 82.17?

Has to be a typo or he was running around 120mph at the end of that 1/8th to get a mid 5 second run