would have posted in the classifieds... just wondering if anyone had a built 60e/65e they wanted to let go reasonably?

i hate to pay a shitload to build my trans i have.. its slipping bad though..

i live in Mobile, Al and would gladly drive somewhere that was a reasonble distance from me..

just curious guys..

thanks

Talk to Vince @ FLT or give PerformaBuilt a call. They are both quality transmissions, and won't break the bank.

BTW, they are both site sponsors --->

LOL i have... their trannies that will hold the power level i need are all $2K ++

i know its probably silly to try and be cheap with a built tranny... just was curious before i drop the hammer on a rebuild..... someone may have a badass unit just laying there with my name on it

Performanabuilt is havaing a pretty good deal going on now, gump

Try Pro trans of central Florida

Im in the same situation bro,dealers gonna replace my trans under warranty,till then im saving up for a built trans.

Im in the same situation bro,dealers gonna replace my trans under warranty,till then im saving up for a built trans.

even after the s/c its still warrantied ?

i tried to do that... they wouldnt fonk with it. :(

Yea,i got the blower,lowered,cats deleted,full 3inch exhaust,cam.and yes there still going to warranty it.the partsman is a good freind of mine,thats where i bought the truck.sh1t it went out with only 5000miles

I'm gona be selling the fully build 4l65e and DACCO remanied TB I6 converter that's in my truck in about a month. Nothing wrong with it, just swapping out to a 4l80e. Has about 10k miles on it. Looking for about $1500 for the tranny and converter.

would that trans hold for me kb?

there's a built 80e for 1500 on here pm Nemes

I'm gona be selling the fully build 4l65e and DACCO remanied TB I6 converter that's in my truck in about a month. Nothing wrong with it, just swapping out to a 4l80e. Has about 10k miles on it. Looking for about $1500 for the tranny and converter.

Is it the one Transformance built? Jim is working on my 4L65 right now; nice guy IMO.

I've got a low mile 4L65E with HD2 shift kit and servos I'd sell. Its a 4WD and came out of my Silverado SS. I kept it as a spare but its just taking up space.

would that trans hold for me kb?

It should, been holding fine for me. I did break the out put shaft once doing boosted 4x4 launches, :lol: but I replaced that with a TBSS shaft and all has been fine. It is for a 4x4, but I have an output shaft and tailshaft housing for a 2wd, I'll throw in with it.

Is it the one Transformance built? Jim is working on my 4L65 right now; nice guy IMO. Yep, working great! :)

i spoke with him also... just getting all the advice i can before pulling that trigger