PerformanceTrucks.net Forums

Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

can someone tell me why i am not getting 100% throttle angle with my 07

Thread Tools
 
Search this Thread
 
Old Jan 9, 2008 | 07:53 PM
  #1  
litreddevil's Avatar
litreddevil
Thread Starter
Banned
iTrader: (4)
 
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Default can someone tell me why i am not getting 100% throttle angle with my 07
for some f______ reason it is at 20.9% with jusy key in an on then stays the same when started then nail it 83.1% no matter what i do.HELP!!!!!!!!!!!:b ang:
Reply
0
Old Jan 9, 2008 | 08:18 PM
  #2  
Rhino79's Avatar
Rhino79
9 Second Club
iTrader: (7)
 
Joined: May 2005
Posts: 3,127
Likes: 1
From: Cabot, AR
Default
Thats all it will have, welcome to drive by wire. Everything idle is controlled by the blade, no iac, so thats why there is the high tps angle at idle. And the DBW's iI have seen are at low to mid 80's at WOT.
Reply
0
Old Jan 9, 2008 | 08:25 PM
  #3  
Stoichiometric's Avatar
Stoichiometric
TECH Addict
iTrader: (10)
 
Joined: Nov 2005
Posts: 2,199
Likes: 0
From: Way out there
Default
I know that was a problem when swapping to a 90, but it only opens 83% even with the stock throttle?
Reply
0
Old Jan 9, 2008 | 08:27 PM
  #4  
TouchOfEvil04's Avatar
TouchOfEvil04
TECH Junkie
iTrader: (13)
 
Joined: Apr 2006
Posts: 3,312
Likes: 0
From: Walker
Default
i don't have a 07 but my 04 which is DBW opens to 100% at WOT no problems and at idle is normally between 9-12%.
Reply
0
Old Jan 9, 2008 | 08:29 PM
  #5  
Rhino79's Avatar
Rhino79
9 Second Club
iTrader: (7)
 
Joined: May 2005
Posts: 3,127
Likes: 1
From: Cabot, AR
Default
My 05 TB with the I6 runs 87% at WOT.
Reply
0
Old Jan 9, 2008 | 08:31 PM
  #6  
TouchOfEvil04's Avatar
TouchOfEvil04
TECH Junkie
iTrader: (13)
 
Joined: Apr 2006
Posts: 3,312
Likes: 0
From: Walker
Default
that sucks. glad my 04 doesn't do that.
Reply
0
Old Jan 9, 2008 | 08:31 PM
  #7  
Stoichiometric's Avatar
Stoichiometric
TECH Addict
iTrader: (10)
 
Joined: Nov 2005
Posts: 2,199
Likes: 0
From: Way out there
Default
I have to check mine now. I have a 2001 DBW 4.8L. I know my idle is around 7-9%.

litreddevil, what model truck is this?
Reply
0

Trending Topics

Old Jan 9, 2008 | 08:34 PM
  #8  
Rhino79's Avatar
Rhino79
9 Second Club
iTrader: (7)
 
Joined: May 2005
Posts: 3,127
Likes: 1
From: Cabot, AR
Default
Some of the newer vehicles are using different pcms than the gen3 stuff, so that may have some to do with it too.
Reply
0
Old Jan 9, 2008 | 08:55 PM
  #9  
litreddevil's Avatar
litreddevil
Thread Starter
Banned
iTrader: (4)
 
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Default
Originally Posted by Stoichiometric
I have to check mine now. I have a 2001 DBW 4.8L. I know my idle is around 7-9%.

litreddevil, what model truck is this?


it is an 07 I was told it was in the pnid's but i just f------ everything else up messing with the pnid's now my scan tool is not working right.

i could just blow this **** up
Reply
0
Old Jan 9, 2008 | 09:01 PM
  #10  
litreddevil's Avatar
litreddevil
Thread Starter
Banned
iTrader: (4)
 
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Default
and if i am not going to show 100% then how do i add timing and take fuel to wide open throttle.
Reply
0



Advanced Search

All times are GMT -5. The time now is 04:20 AM.