Megasquirt (paging parish8 or any others with knowledge)
#1
There was a post over at ls1tech where Parish commented on how well the msd and megasquirt work together. My questions are:
How does this set up work with HPTuners or EFI Live?
Do you not use the tuning software for fuel and spark, just trans tuning and stuff like that?
For example do you use megasquirt or HPT to tune fueling/injector sizing?
How user friendly is megasquirt? more or less than HPT or EFILive?
How does this set up work with HPTuners or EFI Live?
Do you not use the tuning software for fuel and spark, just trans tuning and stuff like that?
For example do you use megasquirt or HPT to tune fueling/injector sizing?
How user friendly is megasquirt? more or less than HPT or EFILive?
#2
For any of those wanting to follow this thread, I have asked some of the same questions over on ls1tech.
See thread: https://ls1tech.com/forums/showthrea...=1#post8246707
See thread: https://ls1tech.com/forums/showthrea...=1#post8246707
#3
My old howto from when I ran a MS. May all be out of date at this point.
http://www.silveradoss.com/forums/in...&hl=megasquirt
I ran an MS and HPT. I removed the MS when EFI began to offer custom multi-bar SD OSs and now run that. I miss the real time tuning, but can always go to a road runner setup to recapture that if needed.
http://www.silveradoss.com/forums/in...&hl=megasquirt
I ran an MS and HPT. I removed the MS when EFI began to offer custom multi-bar SD OSs and now run that. I miss the real time tuning, but can always go to a road runner setup to recapture that if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Porscharu914
GMT 800 & Older GM General Discussion
14
Jan 20, 2016 10:45 AM
drummer0415
GMT 900 Trucks General Discussion
11
Oct 24, 2015 08:16 PM
Stainless Works
Sponsor's Announcements, Sales, and Specials
3
Oct 8, 2015 12:01 PM
carid
Sponsor's Announcements, Sales, and Specials
0
Sep 10, 2015 09:07 AM




