PerformanceTrucks.net Forums

MULTIMEDIA (truck related) Post your Truck pictures and videos (PG-13)

Me vs My buddys 350Z with Nismo Package

Thread Tools
 
Search this Thread
 
Old Oct 16, 2007 | 02:41 AM
  #1  
nonnieselman's Avatar
nonnieselman
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default Me vs My buddys 350Z with Nismo Package
Lets see if somebody can figure out my problem...


http://youtube.com/watch?v=n372kCeyjds
Reply
0
Old Oct 16, 2007 | 02:41 AM
  #2  
Spoolin's Avatar
Spoolin
GFYS and STFU
iTrader: (8)
 
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
Default
Ummm...DRIVER ERROR!!
Reply
0
Old Oct 16, 2007 | 02:41 AM
  #3  
nonnieselman's Avatar
nonnieselman
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default
This race was when i was having all them problems with my 5.3........
Reply
0
Old Oct 16, 2007 | 03:04 AM
  #4  
nonnieselman's Avatar
nonnieselman
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default
Originally Posted by Spoolin
Ummm...DRIVER ERROR!!
haha... more like double check that tune error...
On the second race we started on a small hill... he got traction...
That car does sound good, never heard one that ive liked till then..
Reply
0
Old Oct 16, 2007 | 08:00 AM
  #5  
Dock Rocker's Avatar
Dock Rocker
12 Second Truck Club
 
Joined: Nov 2005
Posts: 1,451
Likes: 0
From: Jackson, MS
Default
Call me when he wants to race again. I would like to see what the black stallion would do.
Reply
0
Old Oct 16, 2007 | 07:19 PM
  #6  
nonnieselman's Avatar
nonnieselman
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default
He should be at the GTG at hub.... his first pass was a 15.1... haha but he missed 2nd gear... his 60' was ok...

his first time on the track and its a 6 sp..
Reply
0
Old Oct 17, 2007 | 12:06 AM
  #7  
CHEVRACER83's Avatar
CHEVRACER83
TECH Senior Member
 
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Default
Originally Posted by nonnieselman
Lets see if somebody can figure out my problem...


http://youtube.com/watch?v=n372kCeyjds
you were granny shiftin not double clutchin like ya should!!!! your lucky that double shot of nawwwz didnt blow the welds on your intake



Reply
0

Trending Topics

Old Oct 17, 2007 | 12:16 AM
  #8  
99Silverado5.3's Avatar
99Silverado5.3
TECH Addict
iTrader: (7)
 
Joined: May 2004
Posts: 2,558
Likes: 0
From: (281)-(713)-(832)
Default
Originally Posted by CHEVRACER83
you were granny shiftin not double clutchin like ya should!!!! your lucky that double shot of nawwwz didnt blow the welds on your intake



+1 Yep, but me and the mad scientist are gonig to have to tear apart the block and replace the piston rings you fried!
Reply
0
Old Oct 17, 2007 | 12:33 AM
  #9  
nonnieselman's Avatar
nonnieselman
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default
Originally Posted by CHEVRACER83
you were granny shiftin not double clutchin like ya should!!!! your lucky that double shot of nawwwz didnt blow the welds on your intake



yea. i know it.... I couldnt get randy to put a manual clutch in my trans...... oh well

And its a pain in the butt to weld up them cracks in that polymer intake manifold...
Reply
0
Old Oct 17, 2007 | 12:34 AM
  #10  
CHEVRACER83's Avatar
CHEVRACER83
TECH Senior Member
 
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Default
Originally Posted by nonnieselman
yea. i know it.... I couldnt get randy to put a manual clutch in my trans...... oh well

And its a pain in the butt to weld up them cracks in that polymer intake manifold...
Reply
0



Advanced Search

All times are GMT -5. The time now is 06:34 AM.