FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Alkycontrol nozzles

Thread Tools
 
Search this Thread
 
Old Jul 28, 2007 | 09:35 PM
  #1  
Stoichiometric's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: Nov 2005
Posts: 2,199
Likes: 0
From: Way out there
Default Alkycontrol nozzles

What nozzle comes with the standard Alkycontrol kit? I have my controller set on 7.5 out of 8 and was curious how much meth am I spaying? I was kinda thinking about another nozzle and dry n2o kit down the road, maybe.
Reply
Old Jul 28, 2007 | 09:41 PM
  #2  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

I have a 10lb nozzle (the smallest) I think. Mine was on #4 but it's higher now. You really have yours up high.
Oh-oh, another happy gas user?
Reply
Old Jul 28, 2007 | 10:49 PM
  #3  
Stoichiometric's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: Nov 2005
Posts: 2,199
Likes: 0
From: Way out there
Default

I wouldn't have even considered happy gas, but the results don't lie. If I were to go that route, it will be months down the road. My nozzle is probably 10lbs also, is that 10lbs per hour like a fuel injector is rated?
Reply
Old Jul 28, 2007 | 11:01 PM
  #4  
Breeze's Avatar
11 Second Truck Club
iTrader: (16)
 
Joined: Aug 2004
Posts: 3,693
Likes: 0
From: Md
Default

What kinda results are being seen Radix set up like ours with a 50 shot?
Reply
Old Jul 29, 2007 | 01:35 AM
  #5  
PappyDan's Avatar
Tribe Shaman
iTrader: (4)
 
Joined: May 2004
Posts: 3,050
Likes: 0
From: Texas
Default

im leaning towards the 50 shot my self for colder air.
Reply
Old Jul 29, 2007 | 01:57 AM
  #6  
Grr
TECH Fanatic
iTrader: (2)
 
Joined: Mar 2005
Posts: 1,359
Likes: 0
From: Fargo ND
Default

they come with a M15 nozzle. if you need more flow tee it off and go to dual M10 nozzles.
Gary
Reply
Old Jul 29, 2007 | 11:11 AM
  #7  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

The nozzles a rated in gallons per hour at 100 psi. I run a single M10 (10 gallons per hour) with my Devils Own kit. Works pretty well for my 4.8
Reply
Old Jul 29, 2007 | 11:14 AM
  #8  
Mort's Avatar
TECH Addict
 
Joined: Feb 2004
Posts: 2,120
Likes: 0
Default

Originally Posted by Stoichiometric
I wouldn't have even considered happy gas, but the results don't lie. If I were to go that route, it will be months down the road. My nozzle is probably 10lbs also, is that 10lbs per hour like a fuel injector is rated?
My Alky kit came with a M15 nozzle and yes that is 15 GPH but it depends on the pressure of your pump. With a progressive system like Julio's it will vary with the controller setting and the maximum output of the pump. I have two tables I got from STS for the M15 nozzle. The small pump is rated at 0.25 GPM =15 GPH and the large pump is rated at 0.375 GPM = 22.5 GPH. They did not supply the maximum volume or pressure ratings for the pumps but my guess is that the small pump = 100 psi maximum and the large pump = 150 psi maximum. I think that the pump Julio supplies for the trucks = 150 psi maximum.
Reply
Old Jul 29, 2007 | 01:50 PM
  #9  
Stoichiometric's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: Nov 2005
Posts: 2,199
Likes: 0
From: Way out there
Default

Thanks for the info guys. I was going to figure out about how much of my fuel I am supplementing with meth.

Breeze, Bill can tell you for sure how much he gained with the 50 shot, but I think it was worth 50+ hp/tq at the wheels.
Reply
Old Jul 29, 2007 | 07:13 PM
  #10  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

Yeah, here is a comparison.





I haven't run it at the track yet, don't plan to 'till the fall but I have run it twice on the street. It hits hard enough where I don't think I'll have to use it unless some exotic happens to want to play.
I have to give Dewey some time to get it ready.

PS: you can see where the the window switch cuts off the juice.
Reply



All times are GMT -5. The time now is 01:28 PM.