GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

Anyone know of a cheap 15 inch 6 lug wheels?

Thread Tools
 
Search this Thread
 
Old Feb 9, 2007 | 07:19 AM
  #1  
SSlow 4.8's Avatar
Thread Starter
TECH Junkie
iTrader: (4)
 
Joined: Mar 2005
Posts: 3,394
Likes: 1
From: Flowery Branch, GA
Default Anyone know of a cheap 15 inch 6 lug wheels?

Looks like I'll be going with a 15 in. wheel. Looking to get some MT DR's, upgrading from the ET Streets i have now. They have a wider selection of tires for those running the 15 in. wheel. Did GM put a factory 6 lug 15" wheel on anything? Where should i get some from, been searching on ebay, found a bunch of crap...

also if anyone is running some MT DR's... what size do you recommened. Its a 01 rcsb with 4.10 gears.
Reply
Old Feb 9, 2007 | 07:32 AM
  #2  
slowprocess's Avatar
TECH Senior Member
iTrader: (9)
 
Joined: Aug 2003
Posts: 6,204
Likes: 0
From: Cleveland Mississippi
Default

Originally Posted by SSlow 4.8
Looks like I'll be going with a 15 in. wheel. Looking to get some MT DR's, upgrading from the ET Streets i have now. They have a wider selection of tires for those running the 15 in. wheel. Did GM put a factory 6 lug 15" wheel on anything? Where should i get some from, been searching on ebay, found a bunch of crap...

also if anyone is running some MT DR's... what size do you recommened. Its a 01 rcsb with 4.10 gears.
Got mine from Summit. 15x10s Paid alittle over $100 for them both. They're nothing special to look at, but they serve their purpose well at the track. I'm running 28x11.5x15 Hoosier Quicktime Pros on them. You can get a 15x8 from Summit pretty cheap as well. These wheels were made for a big brake kit, so you don't have to shave that much off of the calipers.
Reply
Old Feb 9, 2007 | 07:52 AM
  #3  
SSlow 4.8's Avatar
Thread Starter
TECH Junkie
iTrader: (4)
 
Joined: Mar 2005
Posts: 3,394
Likes: 1
From: Flowery Branch, GA
Default

alright sweet thanks... i didnt even search there, figured they would be too expensive.
Reply
Old Feb 9, 2007 | 08:49 AM
  #4  
Quik's Avatar
5 year bitches!
iTrader: (7)
 
Joined: Oct 2003
Posts: 4,890
Likes: 2
From: Pittsburgh!!!!!!!! Pa
Default

yes 80s 3/4 ton truck had them....igot my ralley wheels from a truck of that era
Reply
Old Feb 9, 2007 | 02:33 PM
  #5  
SSlow 4.8's Avatar
Thread Starter
TECH Junkie
iTrader: (4)
 
Joined: Mar 2005
Posts: 3,394
Likes: 1
From: Flowery Branch, GA
Default

oh alright...

hey slow, the 15x8's on summit... or the 15x10's you bought... do you have a link? cant seem to find to much info on the ones from summit.
Reply
Old Feb 9, 2007 | 02:54 PM
  #6  
SSlow 4.8's Avatar
Thread Starter
TECH Junkie
iTrader: (4)
 
Joined: Mar 2005
Posts: 3,394
Likes: 1
From: Flowery Branch, GA
Default

what about these >>> http://store.summitracing.com/partde...5&autoview=sku

15x10 with a 6x5.50 lug pattern 4.500in backspacing. Is that backspacing and lug pattern sound right to you all?
Reply
Old Feb 9, 2007 | 04:05 PM
  #7  
slowprocess's Avatar
TECH Senior Member
iTrader: (9)
 
Joined: Aug 2003
Posts: 6,204
Likes: 0
From: Cleveland Mississippi
Default

Check these out

http://store.summitracing.com/partde...5&autoview=sku
Reply
Old Feb 9, 2007 | 04:07 PM
  #8  
slowprocess's Avatar
TECH Senior Member
iTrader: (9)
 
Joined: Aug 2003
Posts: 6,204
Likes: 0
From: Cleveland Mississippi
Default

These are the ones I have.....backspacing is, how can I put this, pretty damn terrible. I just don't go to any shows or cruises with them on.
http://store.summitracing.com/partde...5&autoview=sku
Reply
Old Feb 9, 2007 | 04:15 PM
  #9  
SSlow 4.8's Avatar
Thread Starter
TECH Junkie
iTrader: (4)
 
Joined: Mar 2005
Posts: 3,394
Likes: 1
From: Flowery Branch, GA
Default

ya i was looking at those... what do you mean its terrible... is 4 in. too little? or does it not look right?

the ones i posted... do you see anything wrong with them?
Reply
Old Feb 9, 2007 | 04:16 PM
  #10  
dirt track racer 81's Avatar
TECH Senior Member
iTrader: (45)
 
Joined: Jun 2005
Posts: 9,439
Likes: 13
From: Hennessey, Oklahoma
Default

these are the ones i got..they are by no means fancy but they do the job 15x10's they stick out a bit

http://store.summitracing.com/partde...5&autoview=sku
Reply



All times are GMT -5. The time now is 02:51 AM.