GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

New tranny.....when to change fluid?

Thread Tools
 
Search this Thread
 
Old Jan 22, 2007 | 10:53 PM
  #1  
Thread Starter
14 Second Truck Club
iTrader: (6)
 
Joined: Sep 2002
Posts: 2,343
Likes: 0
From: Bossier City, LA
Default New tranny.....when to change fluid?

I've got about 900 miles on the new FLT tranny. Should I change it ~1000 or what? The old tranny I changed it about every 20,000 or so.
Reply
Old Jan 25, 2007 | 05:40 AM
  #2  
Thread Starter
14 Second Truck Club
iTrader: (6)
 
Joined: Sep 2002
Posts: 2,343
Likes: 0
From: Bossier City, LA
Default

ttt...
Reply
Old Jan 25, 2007 | 07:46 AM
  #3  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

Wondering the same thing.
I've had mine in for a few K now.
Reply
Old Jan 25, 2007 | 09:11 AM
  #4  
redsilverado05's Avatar
TECH Apprentice
 
Joined: Jan 2007
Posts: 353
Likes: 0
From: Perry FL
Default

I've been through 2 tranny's in a Ram 1500 and my cousin just went through one as well in his silverado . I was always told, unless your towing,doing some serious racing,fluid gets low, or it turns dark to leave it alone. Don't mess with it. As long as it's red and clean it's fine. Also. there's no break in period on a tranny. if anything take it easy for about 250 miles just to make sure everything is working ok.
Reply
Old Jan 25, 2007 | 09:14 AM
  #5  
BlackGMC's Avatar
Resident Retard
iTrader: (31)
 
Joined: Jan 2006
Posts: 17,216
Likes: 20
From: Fort Worth - TX
Default

Maybe Vince will chime in and give us his opinion. I would also like to know about tranny filter changes, basically how often to do them.
Reply
Old Jan 25, 2007 | 09:15 AM
  #6  
James B.'s Avatar
TECH Fanatic
20 Year Member
iTrader: (1)
 
Joined: Mar 2003
Posts: 1,985
Likes: 3
From: 33.91° -117.48°
Default

There's nothing to really "break-in" on an auto trans. The main property of the transmission fluid that periodic changes are meant to refresh is the detergent in it. Sediments and particles either settle or are filtered, so changing it this soon is more a matter of inspection than preventative maintenance. If you do it now you can catch early problems like metal in the pan, discolored fluid, etc. You've got one built by FLT and that makes it unlikely that you'll find a problem.
Reply
Old Jan 25, 2007 | 12:36 PM
  #7  
truckmann's Avatar
TECH Junkie
iTrader: (8)
 
Joined: Jul 2006
Posts: 3,894
Likes: 0
From: OK
Default


Since FLT dynos thier transmissions they have most likely found any possible problems before you even get it, hell that's why they do it. I agree with if it's working good just leave it be. It seems that often times a fluid change leads to the early death of a transmission.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turk55
GM Drivetrain & Suspension
2
Sep 11, 2015 11:52 AM
Lostinmiself
GM Drivetrain & Suspension
6
Aug 28, 2015 06:30 PM
vmaxpro
GMT 900 Trucks General Discussion
2
Aug 8, 2015 10:49 PM
walledition
GM Drivetrain & Suspension
1
Jul 29, 2015 08:54 PM
Suburban2500
INTERNAL ENGINE MODIFICATIONS
31
Jul 19, 2015 04:50 PM




All times are GMT -5. The time now is 09:12 AM.