Here's a vid of my 98 ext.cab Sonoma turbo project. Quality isn't very good but you get the idea. PEACE OUT>Tony
http://www.youtube.com/watch?v=0a_hrcoldtY

:headbang:

Followed this on S10Forum for awhile. Good to see it finished up. :cheers:

Right on, good job!

very cool, and I like the stock ZQ8 wheels, sleeper and yet they look good.

I have a set Boyds Motorious 17x8's with Nitto's stored away that I'll be putting back on soon. PEACE OUT>Tony :judge:

Lookin good Tony!

Thanks for the vid!

nice truck and nice tour of it in the vid.

Trans has been rebuilt to take the hp. Modded the tb bonnet so won't ever come off under boost. Started installing the 2114 intake. Once finished, we begin tunning. PEACE OUT>Tony
http://i160.photobucket.com/albums/t193/turbonoma1998/DSCF2662Large.jpg

Got the stock intake out. Just need a few misc. items and my tb bonnet back from Sam and I'm done. PEACE OUT>Tony
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC01857.jpg

Sweet... sounds like it's coming along! Make sure to put up a couple pics at least when your all buttoned up and ready to go

I love to see people doing things with the 4.3L. There is a lot of potential in these motors. Good work!

Got the stock intake out. Just need a few misc. items and my tb bonnet back from Sam and I'm done. PEACE OUT>Tony
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC01857.jpg


Can you get me some more information on this intake?

Well this intake is made to be used with a carb. It was converted to fuel injection by a buddy of mine(sam steeb aka gotswrv) by milling it for injector bungs. He also made the custom tb spacer,fuel rails/fuel lines. Race Proven Motors sells one with the bungs. You just need to get the rest of the parts to finish it. Hope this helps. PEACE OUT>Tony

Holidays are over so I'm back at it again. Just need to hook up a few things and of course do some tuning and she'll be good to go...I hope! Using 65# injectors.PEACE>Tony
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02110.jpg
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02109.jpg

Had to rearrange the fpr/coil setup to solve the dizzy clearance problem. Alot better now. PEACE>Tony
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02136.jpg
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02137.jpg

Well guys the 2114 install is 99% complete. Waiting on fittings to finish hooking up the fpr to the fuel rails. PEACE>Tony
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02143.jpg
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02144.jpg
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02145.jpg

Well it's finished and it came out swell. Great big thanks to my buddy Sam aka gotswrv who thought of all the little sh*t. PEACE>Tony
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02146.jpg
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02147.jpg
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02149.jpg
http://i160.photobucket.com/albums/t193/turbonoma1998/DSC02148.jpg

Got a cal. file from Sam aka gotswrv and I'm gonna install it tomorrow and see if it starts up. I'll have a vid soon. PEACE>Tony

I downloaded the cal.file. The engine turns over but won't start. Need to check the usual stuff first like timing,spark,and making sure the injectors are working.
PEACE>Tony

Found a gas leak on one of my hard fuel lines. Plugs are dry.Need to verify the dizzy and check for pulsing at the injectors. Rome was not built in one day but this is killing me. PEACE>Tony

damn, you're so close. good luck, hope you get it done soon, anxious to see it runnin

Well Sam sent me a revised tune today. He changed the injector delay. Hope this is enough to fire it up. PEACE>Tony

Well after coming back home,I checked out the electricals and it looks ok. I have spark at the coil but I discovered some other gas leaks around the Y block in the rear of the mani. I also noticed I have no fuel pressure or at least the gage is not registering it now.@#$%&* seems like when I get close to firing it up, something else shows it's ugly face and throws a wrench at me. PEACE>Tony

hope to see this thing up and running soon.......ur buddy ever think about making those intakes for the V8s

Really good job....I love how clean you kept it.