|
View Full Version : guage question jow02327 09-05-2006, 10:09 AM looking to put a 3 pillar pod in the dodge with Tranny temp, pyro, boost guages just a few questions. on the boost guage do i want one that shows vacuum and boost or just boost. also do i want 30psi or 60psi. also on the pyro do i want the 1600 or the 2000 thanks in advance RankRam 09-05-2006, 12:02 PM Just boost, there's no vacuum on the CTD's and also get the 60lb guage.......also get a trans temp line with a temp probe, here is a link to the one I'm using. http://www.dieselmanor.com/dm_products/DM-CLG3.asp RankRam 09-05-2006, 12:06 PM Take a look at this site too, the Cool Blue hose is a great way to increase your airflow. Take a look at their intercooler hoses too! jow02327 09-07-2006, 06:44 PM no link RankRam 09-08-2006, 08:28 AM Oops! http://www.dieselpowerproducts.com/air1 TchargedLS1TA 09-08-2006, 11:15 AM The more the better.. However I have yet to see a common rail go over 1600*F.. CumminsTex 07-10-2007, 08:37 AM The more the better.. However I have yet to see a common rail go over 1600*F.. lol wish we could say that about 2nd gens chaselanesmith 08-01-2007, 02:36 PM Just boost, there's no vacuum on the CTD's and also get the 60lb guage.......also get a trans temp line with a temp probe, here is a link to the one I'm using. http://www.dieselmanor.com/dm_products/DM-CLG3.asp I agree 100% at first I had a 35psi and not two months after I was already pegged out and had to buy a 60psi gauge! Just make sure you put your exuast temp. before the turbo not after because you want to know temps going in not coming out a common mistake made by too many people. |
|