|
View Full Version : radix dyno doublenot 08-22-2006, 05:33 PM Finally got my radix on and went to TSP. 3.0 pulley=6lbs, comp 224R, ported heads, and pacesetters http://i9.photobucket.com/albums/a62/bbritain/radixdyno.jpg 2k5Squirrel 08-22-2006, 05:35 PM very nice :drive: trever1t 08-22-2006, 06:13 PM Xcelent #'s !! What motor/Mods besides cam? doublenot 08-22-2006, 06:24 PM It's an lq9. I have dual exhast with magnaflows and 918's, ti retainers, pushrods. I think that's it. Now I need to beef up the tranny! thunder550 08-22-2006, 06:26 PM How much timing are you running? Dub Silverado 08-22-2006, 10:46 PM You are only getting 6psi with a 3.0 pulley? doublenot 08-23-2006, 05:57 AM Yeah only 6lbs. I'm assuming it's due to the cam on 112lsa and the longtube headers. It's nice though still have some lope. I'm not sure what timing is I'll find out. krambo 08-23-2006, 09:09 AM Nice! Converter locked? doublenot 08-24-2006, 06:03 AM don't know if it was locked or not. Still running the stocker. need to get a new one. Allgonoshow 08-24-2006, 08:44 AM what's with the date on the dyno sheet? SnakeOiler 09-17-2006, 08:02 AM was the truck still hot on the 009 pull? Just curious if that was the culprit of the 11hp/tq loss. Looks a bit rich. Good size numbers, though. Avsfan 09-17-2006, 09:43 AM I'm with Allgono... Not bad for an almost two year old pull... lol... Better let your dyno operator know what year it really is... doublenot 09-19-2006, 09:54 PM Yeah it was a back to back run and it was richened up I think 1%. Date was jacked up because the computer kept crashing. I was there for about 2 hrs before we could get everything working. On the last run he had to hold it at 3k for a little while before the afr would come up so it was probably a little warm. maddboost 09-22-2006, 11:15 AM That was most likely locked because there isnt much of a torque spike in it. Great numbers for only 6 psi. 02sierraz71_5.3 09-22-2006, 11:47 AM nice # wonder what the tq is at 3k rpms or lower? |
|