I'm having trouble finding a plate system (wet) for a friend's 2004 GMC 5.3 truck. I know that I can install a universal wet GM EFI kit (nozzle), but I guess I'm a little partial to plate setups since that's what most of my experience has been with.

I did a little bit of searching, and the only plate I could find was Nitrous Dave's plate, which sounds like it's a new piece with very little feedback. I also didn't see any pricing info, or if this is an upgrade for a standard wet GM EFI kit, or something you have to purchase seperately.

Any info is appreciated.

Thanks,
Jeff

 

I have always used the nozzle kits. NX makes a great kit that utilizes their shark nozzle and it works good.

 

NOS has a plate system also. Dave should carry ir too. Watch for a new PRO Wet Dual Nozzle kit from Nitrous Direct. Very trick and of the highest quality, priced at a bargan. Will post up intro thread in the morning.
Robert

 

I've seen the NOS plate system for LS1s. Will it fit other LS based motors (5.3) too?

 

theres a company that makes a throttle body spacer plate, and nx makes a MAF thing

 

We are on our second batch of plates now.This means there is about 20 plates out there now.So you should start seiing some good feed back shortly.

However we did test this unit very well before sending it out the door. We do not let our customers be the test pilot..

We are building a new web site.This is why you do not see anything on the old site.Its getting neglected and the new site is getting all the products and info

Our Plate system sells for 650.00.
Dave