Hey guys....I work for Chrysler....and I reccomend using a MOPAR Performance Engine Controller. They are a new ECM custom tuned for your applicatin and are affordable. They off HP increases of about 44 HP and 50 lbs of torque. I've used them and had great results. Go to this website below

:drive: http://www.mopar.com/m_perf_subcatCheck.jsp?SubSubGrpID=760&dummy3=1135352382200

I had one on my 98 ram, worked ok, but I think it really needed the other mopar goodies offered on the 5.9 to take full advantage of it.

They have an srt-10 computer now it seems, but to the same old question... where's the mopar computer for the hemi? :(

I had one on my 98 ram, worked ok, but I think it really needed the other mopar goodies offered on the 5.9 to take full advantage of it.

They have an srt-10 computer now it seems, but to the same old question... where's the mopar computer for the hemi? :(

Ahhhh...patientce grasshopper....it's on it's way.

link didn't work for me.

I just put one on my 97' ram with the 5.9L and what a difference! Also better than the Hypertech!

How much do these things cost cause i'm looking to quicken up my ram

The one on my 98 ss/t was $550cdn So maybe 400-450us.

They are a good base for mild modificiations. But once you start changing cams and porting heads, etc etc, you really need a custom flash. But, they do work well with just the bolt ons.

I for one will not be happy with just a single tune PCM... I HAVE to have a way to tune EVERYTHING!!!

TJ

How about a Tune for the 2005 5.7 Hemi?

I bought mine used for 200 bucks!

the wife's srt8 cherokee needs a tune... got anything for that?