Could you guys post pics of your installs, engine bays, bottles and sw panels. I am looking for some pics to host on my web for reference and will note owner. Thanks ahead.
Robert

 

Here's a before shot... Not installed yet.
If you have seen a cai intake on one of
these trucks, the maf is located right
after the cone filter.
I cut my AEM intake in two pieces so I
could relocate the maf away from where
the nozzle is going to be inserted. Now,
I have about 12'' of adjustment infront
of the maf.

I was having trouble mounting the maf to
the TB so this seemed to work.



I know this isn't what you asked for but,
getting this dry kit installed is my next
modification so I should have pictures
of the finished install soon.

Thanks, Kyle

 

Great, that's one clean engine bay. sounds like you have your trick install all figured out.
Robert

 

My kit is a ny-trex kit not sure thats what you want to see but the pics are in the link in my sig page 3 or 4 I can take some better quality/bigger ones of whatever you want if need be.

 

All kits/brands are welcome. It's more for tech reference than to spot light a brand. Just want unique clean set-ups. thanks
Robert

 

Well there are some pics in the link in my sig wont be able to take any new ones dor another 3 weeks or so when I get the new engien dropped in.

 

Here is a pic of my bottle hidden under my bed.. Sneaky Sneaky
I need to get a better pic. It really doesnt get dirty down there despite what the pic shows.

Here is an older pic of my motor. Its a basic two stage in the pic; with a dry shot fallowed by a wet shot.

 

In cab bottle install.All i need is a bottle blanket to finish it off

 

How about a little trade? You donate the LS1 wet kit, window switch, timing controller, switch panel, and in-line fuel booster pump and I'll take photos of it installed.

 

Nice, PM sent.
Robert