Anyone know where I can get these rollpan caps\tips ??

Or hell, even the rollpan AND caps.

ANYONE?

http://www.pickuptruck.com/IMAGES/autoshows/sema2002/chevrolet/ss/rear.jpg

Nope....Street Scene makes a simliar roll pan....not quite the same..ImpoSSterSS on silveradoss.com made that same setup on his...but..lost the files to the caps....so....???...heres the Street Scene roll pan.....

http://i3.photobucket.com/albums/y69/ChvyMan22/100_0096.jpg

http://i3.photobucket.com/albums/y69/ChvyMan22/100_0135.jpg

i had that on my 94 i hated how it showed my shackles and they couldnt run 3.5 tips through mine because off clearance . that top one has to be custom made . looks like a normal rollpan with some fab done .

Yeah, I have that rollpan. And I HATE the look of those crappy caps. If someone could make a tip that had a hole on the side, I think you could get an exhaust going through it. either that, or get those caps and weld some sheetmetal over the shackle piece so you can't see it.

The Regency Silverados utilize a rollpan similar to that and use the exhaust cutouts....as far as the 1 in the pic..thats a one off from GM...it doesnt use leaf springs...it sits on a Tahoe suspension...5 link

There is a guy on SilveradoSS.com that makes a custom roll pan. BSER is his screen name. Nice looking piece.

Well, seems as though im gonna go the custom route.

Im sending this rough piece off to stainlessworks to have them custom make me some tips. What do you guys thing?

Anyone with the SS rollpan and leafsprings may be interested in this piece.

PICS:


http://x12.putfile.com/12/33513232418.jpg

http://x12.putfile.com/12/33513205115.jpg

http://x12.putfile.com/12/33513203111.jpg

http://x12.putfile.com/12/33513192027.jpg

http://x12.putfile.com/12/33513194493.jpg

good luck, let us know how it turns out.

Yeah I'll let you guys know. Im waiting for an e-mail back to see if they can make it or not.

*crosses fingers*

Hope some of these help.

http://pic3.picturetrail.com/VOL19/1333881/4434524/120635106.jpg
http://pic3.picturetrail.com/VOL19/1333881/4434524/120635945.jpg
http://pic3.picturetrail.com/VOL19/1333881/4434524/120636854.jpg

Dats nice! :nod:

Here are a few with the cardboard piece on it..


http://x12.putfile.com/12/33516331233.jpg


http://x12.putfile.com/12/33516341084.jpg


http://x12.putfile.com/12/33516345297.jpg

id becareful to hurt the paint . i know my tips get hot as hell . i went to go clean some tar by them because they come out the side 45 angle and i hit one with my wrist and burned it . just letting you know

If it was me when I got them back I would get them ceramic coated it will keep them cooler and also you can polish the shit out of them:D

id becareful to hurt the paint . i know my tips get hot as hell . i went to go clean some tar by them because they come out the side 45 angle and i hit one with my wrist and burned it . just letting you know


Yeah, I know it gets pretty hot. Im gonna have the make it slightly smaller just so it doesn't mess up the paint when I get the rollpan painted.


And slow01Z71- that doesn't sound like a bad idea :D

Yeah you would be amazed how much the temp will drop of the metal with getting them ceramic coated.
You can use this stuff to polish them up nicely
http://www.olycoatings.com/products.html
http://www.olycoatings.com/images/slickhead2.jpg
Grippy came up with this stuff havent tried it yet but supposedly it works well.