can i still run a 100shot with my cam?
#1
Thread Starter
TECH Apprentice
Joined: Feb 2005
Posts: 320
Likes: 0
From: belleville, il
so im putting in this cam/spring/pushrods this friday.
when i get it tuned the Rev Limit will be pushed up to 6500-6600 rpms.
could i still run a 100 or 125 dry shot?
when i get it tuned the Rev Limit will be pushed up to 6500-6600 rpms.
could i still run a 100 or 125 dry shot?
#2
I fyou run a dry shot that large IMO you will blow the motor without an upgraded inline fuel pump and a good tune. I would get a wet kit they are safer and easier on your engine.
#4
Rook,
Neat camshaft! I'm doin' one similar when I get around to it. I've had the specs for about 6 months now:220/216 109 -1. 0* of overlap @ .05''
The main key to it is the lobe choice for the intake and exhaust like you've done. My speced cam should idle slightly better than a TR224 112 on the initial start up.
I got about 13 pages of tech on "Reverse split" cams from a few guys so I thought I might give it a shot.
Anyways, good look with the nitrous.
Neat camshaft! I'm doin' one similar when I get around to it. I've had the specs for about 6 months now:220/216 109 -1. 0* of overlap @ .05''
The main key to it is the lobe choice for the intake and exhaust like you've done. My speced cam should idle slightly better than a TR224 112 on the initial start up.
I got about 13 pages of tech on "Reverse split" cams from a few guys so I thought I might give it a shot.
Anyways, good look with the nitrous.
Thread
Thread Starter
Forum
Replies
Last Post
lxcoupe
FORCED INDUCTION
1
Jul 27, 2015 08:19 PM





