has anyone experienced this yet? it's an 05 f250 with the 6.0 powerstroke. the lid has been changed along with three new gaskets. it is still leaking. it is not driping but gets wet after about a week.

I helped my dad change his no problem after he seated it good.

well i dont have that service truck anymore. i changed out that gasket three or four times. i am thinking maybe the housing was defective.

well i dont have that service truck anymore. i changed out that gasket three or four times. i am thinking maybe the housing was defective.
could posssibly be.. took my dad a 2nd try to get it good though.

mine does too...

I've never seen a filter housing be bad with my whole two years expereance with internationals lol. I have had problems getting them to seal, but trust me, with the fuel pressure in the housing being 45-60psi, you will know if the o-ring is not sealling. what brand of filter/lid are you using? do you still have the stock filter lid?

I just relized this says FUEL filter... I think my oil filter is the culprit.

Sure it aint just fuel residue squeezing out from under the gasket when you changed it?