http://img287.imageshack.us/img287/5843/img05167zb.jpg (http://www.imageshack.us)
http://img287.imageshack.us/img287/6154/img05189vr.jpg (http://www.imageshack.us)
http://img287.imageshack.us/img287/3979/img05208eh.jpg (http://www.imageshack.us)
http://img287.imageshack.us/img287/7380/img05239zy.jpg (http://www.imageshack.us)
Dave
XLR8NSS
07-19-2005, 06:19 PM
I think he's gonna need the big bottle....make that TWO of them. :eek2: :D
white1
07-19-2005, 08:19 PM
Thata just plain SCARY :devil:
1Blown04
07-19-2005, 08:30 PM
It looks like some crazy robotic spider :eek2:
BlownChevy
07-19-2005, 09:40 PM
Holy Spider Web BatMan!
PappyDan
07-19-2005, 10:47 PM
is there enough room under the hood for it.
gee wizzzzzzzzzz i think nick's left nut will go boom after that shot. may need a change of under wear.
WillPewter2000
07-20-2005, 01:51 AM
What's the advantages of something like this? Just a bigger shot of juice?
1slow01Z71
07-20-2005, 06:18 AM
Disperses the nitrous better and more evenly it is recommended to go direct port when spraying over 200 and you dont have to worry about nitrous puddling in the intake and blowing the intake off the engine. But a major PITA to change to a diff size shot.
TXsilverado
07-20-2005, 09:20 AM
dont blow it up
Nitro Dave's Nitrous Outlet
07-20-2005, 10:45 AM
LOL,
Hey I can not beleive no one has noticed something wrong with the system in these pics.Ok the first one that notices it Im going to send a free 860 Hex to wing adapter....
Ready GO.
And Jeremy you can not participate.haha
PappyDan
07-20-2005, 11:54 AM
here's my guess, the end of the lines on top is not color coded like the rest of the system.
i don't play with the nos systems so i have no idea if the job was done right or wrong.
Nitro Dave's Nitrous Outlet
07-20-2005, 03:36 PM
Ok guys the guys on the car site got it already.We put the Nitrous solenoids on wrong for the pics.The supply comes out of the bottom of the nitrous solenoids.We have the feed screwed to the hard line.
Dvae
XLR8NSS
07-20-2005, 05:09 PM
You could have left them off completely and I wouldn't have figured it out. :jest:
wkdivr
07-20-2005, 05:11 PM
http://img287.imageshack.us/img287/5843/img05167zb.jpg (http://www.imageshack.us)
http://img287.imageshack.us/img287/6154/img05189vr.jpg (http://www.imageshack.us)
http://img287.imageshack.us/img287/3979/img05208eh.jpg (http://www.imageshack.us)
http://img287.imageshack.us/img287/7380/img05239zy.jpg (http://www.imageshack.us)
Dave
All that on a plastic manifold!
redaddiction
07-20-2005, 09:56 PM
Why two nozzles per cylinder ?
4.8 stocker
07-20-2005, 11:38 PM
how much does something like this cost and can it be done w/o forged internals?
1slow01Z71
07-21-2005, 10:01 AM
It can be done without forged internals but you wont be able to take full advantage of the setup only be able to shoot a 150 shot or so.
Ls7colorado
07-21-2005, 04:46 PM
Your missing 4 injectors?
vanillagorilla
07-22-2005, 07:31 PM
Why two nozzles per cylinder ?
Two-stage baby! :chug: That thing is crazy lookin.
So how much for all the jets for that thing? :jest:
2ktukin20s
07-29-2005, 01:38 AM
Some one has also found out that the squeze is more addictive than cocane. I think this is what we would call a nitrous junkie
wannagofast
07-31-2005, 01:49 PM
:eek2: OOOOO ahhhhhhh :drool:
moregrip
07-31-2005, 04:17 PM
thats one way to dress up a truck manifold :)
very nice work!
01Blackerado
08-13-2005, 06:50 PM
Glad you guys like it :) I'm trying to get the wiring done right now but I'm having trouble finding out where my TPS sensor is ono the throttle body. I need to get my TPAS switch hooked up and it needs the signal that tells whether or not it's at full throttle. I also have to find out where I can receive a RPM signal from!! I need to hook up the MSD window switch!! Thanks again