Ok not really a spy :secret2: photo since I am the one that built this thing. Sorry for the delay on this guys but to some time to get this worked out. This picture is of the Last Artical sign off piece. I will be doing a final fit on a 2001 Corvette this week, ( as long as the car shows up). Capable hp as in picture 200 can be upgrade to 200+ but you loose the solenoids attachment points.
This will be the cleanest install ever your will only have 2 hoses to deal with and noids are already mounted.
I need yalls feed back on this so I judge the time line and production counts on the unit. (RickyS@nitrousexpress.com)
One draw back to this sytle of MAF you have to cut the plastic discharge side off the maf sensor.... We did it with a simple hack saw a little time and cleaned it on a belt sander, took all of 10 minutes.

http://www.ls1camaro.net/freehosting/DSCN2471.jpg
http://www.ls1camaro.net/freehosting/DSCN2470.jpg
Ricky

that's clean

:drool:

Looks good. Got anything for a stealth :secret: wet system??

Looks good pm me with pricing info.

That kicks ass! You designed and built that? That's impressive, just a couple questions though: Where does the mix spray out of, that hole in the center? Will that provide an even enough distribution? Any reason for making it "spit" at an angle like that?
If I didn't already have N2O on one car, I'd be all over that like a fat kid on a doughnut. :D

That kicks ass! You designed and built that? That's impressive, just a couple questions though: Where does the mix spray out of, that hole in the center? Will that provide an even enough distribution? Any reason for making it "spit" at an angle like that?
If I didn't already have N2O on one car, I'd be all over that like a fat kid on a doughnut. :D

Yep I designed it, thanks for the compliment.. Yes the nitrous comes out parelle to the sensor, and fuel comes out 90' to that. even distribution for sure, the truck intake is a marvel of turns bends, really there is nothing you can do up front to miss the distribution up.
Not sure about the split question kinda confused me there.
If you already have nitrous I will offering that in a conversion form...
Ricky

that looks bad@$$. very clean. could you pm me with some pricing plz.

Another for pricing please.

I saw that last week on LS2 and thought it would be a great upgrade to my simple dry setup when the time comes. Although I am not so sure how well it will work on a truck with the maf in the stock location. I would worry about the fuel droping out and puddling with it beeing so far downstream of the throttlebody. I already have a custom intake with a relocated maf so I think it would work well in my case.

I saw that last week on LS2 and thought it would be a great upgrade to my simple dry setup when the time comes. Although I am not so sure how well it will work on a truck with the maf in the stock location. I would worry about the fuel droping out and puddling with it beeing so far downstream of the throttlebody. I already have a custom intake with a relocated maf so I think it would work well in my case.

No worries fuel will not puddle in the intake.
Ricky

Prices?

very nice!

That shit is double :pimp: :pimp:

Not sure about the split question kinda confused me there.

I was just saying that it "spits" into the wind.....you know, sprays upstream and at angle. I was just wondering if there was any reason for the angle.

I understand the upstream part as it will be fully atomized for kick ass distribuition. :judge: :)

Can I get a price PM'ed?

whats the advantage of spraying at the MAF as opposed to infront of throttle body?

price pm please and is this a wet or a dry system........ sorry no little about nos

Its always nice to see new inovation, Looks like a nice secondary cooler for my Radix

CRASH DUMMY :secret2:

Hmmmmmm :secret:

Would that set-up benefit the Radix,being the IAT sensor is now in the manifold? Why not just spray it into the intake tube?

Ricky can you shoot me a price thanks.

899.00 is Jobber on this unit..
Ricky

Looks great to me, but will it bolt to a granatelli and can you send me a price for this system?

whats the advantage of spraying at the MAF as opposed to infront of throttle body?
Your MAf can adjust the fuel injectors for the added o2 passing the sensor

whatever happened to this... anyone try one w/ the Radix?

Your MAf can adjust the fuel injectors for the added o2 passing the sensor

but youre spraying a wet shot at the MAF, so you dont need extra fuel right?

clean setup.let me know the price and when they will be available

Ok let me clair some stuff up here. It is a wet kit and sprays the fuel and the nitrous after the MAF.
See this unit you cut the plastic side of the MAF off and this unit bolts into its place. There is NO benifit that I have found spraying from the MAF or the intake tube.. HP the same as far as the test car goes.
This system is just an ultra clean set up. It will be show cased in a GM Hightech in the near future...

I am sorry but I can not post any pricing on the system.. I have done so in the past but can no longer since NX is not a sponsor on this forum YET> We may be coming on board in the near future..

If you have any more question about it please let me know here or you can email me at rickys@nitrousexpress.com

Ricky

Does this system have jets that can be changed? I am interested in this for a Magnacharger setup. I would need it to be interchangeable for 50-75-100. Thanks!

me too...but it looks longer than the maf on now...so I'm want to hear someone say it works w/ the stock box and the Radix intake tube.

is this the same as the corvette one-piece on the nx website

Does this system have jets that can be changed? I am interested in this for a Magnacharger setup. I would need it to be interchangeable for 50-75-100. Thanks!
YES, it comes with jets.

me too...but it looks longer than the maf on now...so I'm want to hear someone say it works w/ the stock box and the Radix intake tube.
I need to see a clean picture of the maf area and I can tell you if it will fit or not.

is this the same as the corvette one-piece on the nx website
YES same one.

Ricky

hey nxricky, off topic, but do you know when the kit for nitrous direct injection into the injector holes will come out? the one with a nozzle that plugs into the injector hole and then the injector plugs into the nozzle?

hey nxricky, off topic, but do you know when the kit for nitrous direct injection into the injector holes will come out? the one with a nozzle that plugs into the injector hole and then the injector plugs into the nozzle?

Sorry no I do not.. That style has been done by several companies already, I am sure they could maybe possibly ship quickly...
Have you tried PM ND.
Ricky