GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

Traction Control kicking in with new gears/lift/tires

Thread Tools
 
Search this Thread
 
Old Jun 16, 2005 | 10:39 PM
  #1  
OliverM5's Avatar
Thread Starter
Staging Lane
 
Joined: Jan 2002
Posts: 71
Likes: 0
From: Beverly Hills, CA
Default Traction Assist kicking in with new gears/lift/tires

I have 35" tires, with a 6" lift and 4.56 gears....before I had tuning done, my brake light and ABS light would light up after starting the car and taking off, as well as my traction control light coming on and putting the car in a "limp mode".

I had tuning done to account for the tires and gear ratios, which cured the brake and ABS light, but the traction control still comes on after initial takeoff and keeps the car running weird until I press the button to disable it....anyone else have this problem and how can it be fixed?
Reply
Old Jun 17, 2005 | 11:22 AM
  #2  
mjgjr72's Avatar
On The Tree
 
Joined: Jun 2004
Posts: 178
Likes: 0
From: connecticut
Default

check the readings for front and rear speed sensors and see if they are the same, tire size programed may be off slightly so the difference in readings is close enough not to set off abs code but just enough that traction controll thinks tires are slipping.

your 35's may be 34.8 tall
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Vortec350ss
Drag Racing
134
Jan 12, 2016 10:36 PM
Avalanche2002
Tuning, Diagnostics, Electronics, and Wiring
7
Nov 30, 2015 07:31 AM
2002_Z28_Six_Speed
GM Drivetrain & Suspension
17
Oct 4, 2015 01:34 PM
old motorhead
FORCED INDUCTION
3
Sep 29, 2015 08:22 PM




All times are GMT -5. The time now is 09:31 AM.