ok there not entirely easy to see since the grill is on but you can see that i fit my cdts under the stock grill, the mid tweeter and crossover, my upstage tweeters are in the apillars my audiosource three.1 crossover/eq/linedriver is in the console where the cd changer would be, rear you can see mu focal mids and my pg tweeters. also u can how nice the RF 800.4 fits under the rear seat. i didnt take a picture of my van gogh because i took it out at the moment as im running a new power cable.
http://hometown.aol.com/visionxorb/images/dcp_0344.jpg
http://hometown.aol.com/visionxorb/images/dcp_0345.jpg
http://hometown.aol.com/visionxorb/images/dcp_0346.jpg
http://hometown.aol.com/visionxorb/images/dcp_0347.jpg
http://hometown.aol.com/visionxorb/images/dcp_0348.jpg
http://hometown.aol.com/visionxorb/images/dcp_0349.jpg
http://hometown.aol.com/visionxorb/images/dcp_0350.jpg
http://hometown.aol.com/visionxorb/images/dcp_0351.jpg

Holy big pictures batman! Haha...

I see alota wires there man, clean that up a little and it will look alot better :thumb:

So, with all that, you are running it off the stock headunit? :confused:
You know with a aftermarket head you will gain so much clarity and setup options it will really make everything sound ALOT better.

yeah about the wires, I got lazy because things were taking me so long as i ran the wires along with the factory along the sides of the car and through the factroy gromets in the doors, also Im using the stock HU because its an 04 and I have onstar, since im not using the factory bose amp ( POS is unpluged ) theres no way i can see of keeping my onstar ( i use the phone part ) and changing my head unit. I have an alpine 9813 not being used at the momnet I could have used but again 04 PITA. anyway i dont really need more setup options my audio control crosses over at 90hz and gives me a parametric EQ for the sub and then 3band for mids and highs not to mention its a 12vpeak linedriver so as long as i can get a decent signal for the hu then that runs my system.

Yea id just be sceptical on how the stock head performs.

Dont they have those modules that plug in and allow you to still use the onstar features but run an aftermarket head?

http://www.jpcustoms.com/store/customer/product.php?productid=16244&cat=310&page=1


What about that one?

yeah but the the way that works is it takes your speaker outs from the new hu and sends them to the bose amp, and then when you use onstar it intereupts that and sends the onstar to the bose amp. that amp is crap and im not using it so it makes things more pain in the ass.

Holy cable management batman.