- junk yard rear end
- Circle D 4L80 Multi - On Sale
- Torque Converter Advice for a Stock Truck...
- 99-up 14sf 6-lug need model and year ranges
- Are V6 and V8 5-spd MT's the same?
- Why Does my Truck Hope Crazy Off The Line
- whats better 3.73 or 4.10???
- Trans problem?
- high stall vs 4x4ing?
- Transmission won't set against my engine!
- Sonnax Performance vs Transgo HD-2 shift kit
- just blew trans
- Drum to Disc Swap
- Trany flush on high mileage silverado
- 2007 classic z71 10bolt swap 14 sf or ff and keeping abs function
- 3/5 ?
- Trans cooler recommendations
- LPW racing 10 bolt 8.6 girdle and there axle tube brace
- NV3500 to 4L60E swap
- Broken 1-2 accumulator piston and spring
- Urban Legend?
- does line preasure putadded strain on the pump
- difference between shift kit and chip?
- FUUUUUUUUUUU*****!!!!!!!!!! axle
- ****Tranny Questtion****
- hummer h3 10 bolt 8.6 rear same?
- about to install a shift kit
- Front end hub question
- TB stall?
- Damaged NEW Tru-Cool Max?
- 14 bolt c-clip eliminators
- Goodbye 4L60
- 4.8/4l60e to lq9/4l80e
- Calling all suspension gurus.
- YANK converter August special
- I need some help...
- 2001 1500HD 9.5" SF 14 bolt axle width?
- More suspension questions
- where can i get a TB stall
- why wont it shift into 4th under WOT
- how much will my time drop with a tb stall?
- Clutch problems
- carrier bearing
- Before and after pictures of my 05 3500 lowered 6-8
- Help help help me please.
- looking for a 2800 stall...
- Drop Question
- What would cause positive camber?
- high stall confusion
- Getting a smoother ride out of the rear suspension
- 3" lift kit or 6" Lift ?
- PI vigilante 2600
- street fighter 3600 stall...
- no 3rd when warm
- Who'd be interested in Circle-D 4L60E GB?
- 80e swap
- gear drop at shift calculator
- 1/2 ton and 3/4 ton axles
- Teach Me: What makes a stall loose vs Tight
- Tahoe Rear Air Bags?
- converting from 8 lug to 5 lug
- Warped axle shaft? Need help!
- transgo separator plate-which gaskets
- i have access to a 14 bolt
- Looking for 14 bolt 9.5"
- looking 4 the best deal
- shift kit and servo
- Rear Springs
- 2003 tahoe trans problems
- Rack/Pinion: new or reman.?
- 5 speed guys come in here
- Pictures of remote mounted trans cooler
- Found a 4L80E for $100!
- Bilstein HD Install Question
- lower??
- Difference bwtween the L33 and LS4
- 2006 Silverado Emergemcy Brake
- new trans not running right
- Which 4L80E should I get?
- Rebuilding a 700R4 on Horsepower TV right now
- die die 4l60e
- LT1 T56 bolting to LSX
- Converter to flexplate measurement?
- Trans Questions
- 05 4dr 1500 bouncing!!!
- 2006 Chevy Crew Cab
- guys with level 2 performabuilt trans
- Gutting trans, rebuilding...what to upgrade?
- 1/2 ton, 2wd guys with TORSION BAR front ends.
- tru trac questions
- 4L80 Transgo HD2 Questions
- Help a noob lower a Yukon (please!)
- Pinion angle/Cal-Tracs input wanted
- which one would you recommened
- Hmm.. Howling/Rumble noise at 90mph w/ 4.10s?
- Help what should I do about my rear end
- E-brakes for disc rears
- Rims rubing my calipers
- Tires rubbing with 4/6 drop
- Help with tranny/converter
- transmission builders in the houston area?
- trans case question
- new trans and setup in and running....
- Thinkin about switchin to smaller tires...
- New trans and SC2800 Stall Questions
- Vibration woes
- Best Shocks and Brakes for 05 Sierra Denali
- New Beltech 673 drop kit!
- what could it be????
- Need new brake pads
- RR Dust Shield? Dumb Q...
- help
- Spool Install questions
- 17s on a 4/6, do i need smaller tires?
- I'm such a moron...
- FLT lvl5 4l80e or lvl7 4l60e
- broke my first transmisions, need help !
- Question about best next mod.
- going to do all wheel drive swap..
- No Fuel ???????
- 3.42 to 4.10s?
- Lowered 3/4 Ton?
- What Transmission would you use!!! Everybody chime in!!
- Trans issues or just tuning?
- Yukon duragrip
- 4L60E rebuild thred with pics...need some help
- 4L80E guys......
- 04 2500hd Leveling
- Need new shocks, but cant find what I want. Suggestions?
- Just did HD2 shift kit and servo with 6.0 swap in the Tahoe, now no 2nd
- Anybody know the size of the fron't and rear rotors on nbs trucks
- Clank/jerk
- Trans swap question, what other year trans direct swap
- 40 Tooth reluctor ring for t56 swap
- got it ordered
- Does ANYONE here have the same truck I do? What did you do about shocks?
- 2001 z71
- 4x4 4l80e output shaft????
- Anybody now where i can get a !@$#@^#%@ axle
- Need shocks for CC Duramax 3500 dropped 6-8
- Energy Suspension leaf spring bushings?
- Transmission Temperature Low's and High's
- anyone bought parts from 4L60E.com?
- axle differential question
- I need to know you need to tell me
- 2000 Silverado 4x4 axle in 2wd?
- bushing shot
- Making 60E hold up to cammed LS1. what do i need?
- What stall...
- Caltracs adjustment question
- what year 4l80e
- Need a Little Stall Education Loose? Tight?
- spindle mod question
- Advantages and disadvantages of 410 gears
- 6L80E broke, 6L90E work?
- think i broke it
- Anybody with hotchkis suspenion...
- 4L60 wont shift on it own
- BAER Big Brakes
- Converter Install Question
- Caliper banjo Screws? HELP!
- Drill Mod
- TB Converter Question
- 2006 front 2wd hubs on a 03.. Do they fit
- staggering tire size
- Stock converter with LS1 and torquer 2 cam in CCSB?????
- Adjust Rear Disc Pressure?
- Attn lowered gmt900's, caution
- Level 7 4l65-70e
- Transfer Case Oil Pump Retainer/Wear Protector
- 4L80 Swap Tips and Tricks Welcomed
- 4l80?
- how long does it take...
- Stuck & Stripped Bleeder Valves
- 4l80e?
- Just bought a 4WD S10 but still want to race.
- 04 ecsb 4l80 swap driveshaft ???
- Transgo HD2..... Skipped a step, guess I'm going back in
- well would it make any difference????
- Clunk, clank, pop...
- Rear end question?
- NEED: 12 Pin Connector schematic/wiring
- 4wd t-case vs awd t-case
- New help with djm 4/6 kit!!!!!!!!!!
- Locking Lugnuts - thread size?
- noob rearend question
- swapping rear gears (08 z71)
- If you're thinking about 4.10's
- Help. 4wd 03' Yukon wont shift into 4th at all....
- 3:73 or lower?
- anyone running a spool?
- yank 3000 stall
- Spacing a 4L80 back
- 4l80 tailshaft bushing
- wheel hop???
- Tire size recommendations on 22's!
- changin gear ratios, what are the benefits?
- what do i need if u go from 4l60e to 4l80e?
- Stall Converter Question
- 4l80 pump.. (where to drill hole?)
- i want to start......
- PerformaBuilt Transmissions Post Labor Day SALE starts now through Friday!
- is the shift kit the same for 4l80 and 4l60?
- 16s on the front of my 05
- 4.10s or 4.56s
- Front Driveshaft ?
- leaf spring keepers
- would like to strengthen my trans for cheap
- No Start After Trans Swap
- M6 Swap
- Officially blew up the 4l60
- new shocks/ questions about the old
- New shocks
- well looks like the ole lvl2 died...
- wat shocks???
- New Clutch!!
- Drivers Side Brake is sticking...bad! (w/vid)
- Front end walks like a bulldog
- 4L80E wiring to 4L60e
- Trans question: epc screens?
- 4L80 Swap
- Vig dimensions to flex plate
- stick in my spokes...
- 07 Silverado lowering
- 40s?
- converter install ?
- help me out here, dd converter question
- 4l80 swap???
- Changing from open carrier to positive traction
- s-10 rear ends
- TB stall behind FI
- Wasted $$$$$??????
- Rear End Lottery
- 2005 Sierra Denali Rear Drop?
- My truck is possessed...
- 4.56 or 4.88?
- NV3500 Bellhousing bolt pattern question
- need some help from someone ..
- TCI makes a 6speed out of a 4l80E???
- Tranny slipping/breaking/trq converter?
- Anyone done 3/5 Tahoe drop?
- need help dropping 2009 silverado!
- Shocks/Brakes Idea's
- Lowering kit-Where to buy?
- synthetic chassis lube
- max input rpm for 4L80E
- Best 4L80E Performance Overhaul Kit...
- AWD RCSB? Denali t case 6.0? turbo?
- upgrade for 4l60e
- Front End steering replacement