- Wow am i having a bad week
- new gear selection.....
- posi with carbon fiber discs?
- 1500 vs 2500HD shocks
- speedo issues
- 04 pickup
- lowering ??????????????
- New tranny and no movement???
- Torsion Bars??
- torque converter?
- 05 Brake Rotors - Warped or Hot Spots?
- Nitto NT404 tires....
- Circle track slicks?
- How much abuse will the 1/2 ton transfer case handle?
- wheel tire question - need help
- Shock upgrade and question?
- anyone ever hear of battle bars?
- for future reference....
- Transmission question FLT?
- Eaton part number?
- Regear with 80e swap?
- didn't take long!
- TT3000 is in!
- Floor Shifter Questions
- what diff to go with???
- What are some good and inexpensive front rotors?
- difference between 700r4 and 4l60e Converter
- 4l80e .bin file needed
- $3,000 and No Transmission
- tru-tac going in today
- Who makes a good shift kit for 4L60e??
- Where to find gears?????
- Got The Spindles Ready
- Plannin on Eaton LSD install this weekend.
- Question on G80 interchangability
- Curious...
- M and H Racemasters?
- 60e questions
- Finally.....A Part I Bought Is Getting Installed!
- anyone have a posi differential
- Six Speed or 4L60E
- transfer case questions allison and auto trac
- cal trac question
- 4x4 guys... need some help
- i Got SCREWED
- New Transmission or Rebuild the one i got
- OMG What a difference!
- Any Caltrac Install Advise?
- odd noise
- Rearend?
- 06 sierra vortec max
- Wierd chattering noise????
- Drivetrain loss 2-piece v 1-piece Driveshaft?
- Flt
- lockup
- Going to ditch my G80, some questions on carrier preload
- truetrac is gona get me in trouble..........
- Rear whining with synthetic....
- 4/6 shocks
- What oil for a new 80e?
- Shackles
- DETRIOT TRU TRAC, what else?
- Sierra killed another tranny
- caltrac pics
- 4/6+500hp= wheelhop???
- Broke the rear!
- If Your A Transmission Don't Cross Me!!!! DIE!!!!!!!!!!!!!
- Snapped front driveshaft yolk :(
- Got some stuff from FLT!
- Help me pick a converter out.
- 28" ET Streets + reg tires in front
- 2pc driveshaft angles question
- rear end alignment?
- Floor shifter..whats this?
- Bad whistle/hum at over 60mph
- 6l90
- anyone run the MT 255/50R16 Drag Radials?
- Which Stall Converter??
- anything I should remember about removing a tranny?
- U-joint size
- Best Place to get ET Streets?
- Spongy Brakes !!
- Started the install on the 1500 series leaf springs & velvet ride shackles.....pics
- Stock 02 Z71 Tahoe Gearing
- 4L80E not working
- Quick Gear Question!!!!
- Caltracs Installed
- Which Way Does Shim Go??
- Service Ride Control??
- '01 Suburban Trans Question
- Transgo HD2 kit - unused parts?
- 4l80 problem
- I am beginning to hate GM Engineers...
- 14bolt drums to disk?
- 10.5" 14 bolt...need a new posi
- rear end shift
- Which pads?
- Gears
- how to install tranny cooler
- brakes !!!
- turbo 400
- 2wd
- FLT tranny ?
- corvette servo
- Leaf Pack Retaining Pin Question
- 2nd gear sucks. :(
- 4L80E.. The real deal..
- new shocks ?
- Truck ride quality??
- Quick Sus. Drop Help
- Colorado stock TC= 3000 Stall LSx?
- What rpm does your stock TC stall up to?
- Detriot TrueTrac install writeup...
- 4/6 Shocks ?
- stock spring rate
- Has anyone gone back to stock after McGaugheys's 2/3 drop?
- Squeal?
- 2" LIFT?
- Re: McGaughy's 2/3 drop deluxe Lowering Kit on my ESV pics!
- I had a bad F'''n weekend!
- vette servo questions
- A way to id your trany by vin# for an 04 silverado.
- Hotchkis Swaybar/Suspension Group Purchase!
- Vibration at acceleration
- single disk vs 3 disk vigilante
- TB Converter on the juice?
- What traction solution would/do you use?
- Spedo recalbrate
- 4l80e neutral safety switch mounting
- change the tranny fluid or leave it?
- rear end goes booom!!
- TCI or VILGILANTE
- towing with the hoe
- Reinstalling torsion bars??
- pinion angle and driveshaft destruction
- 4l80e yoke, which one to buy?
- what is a built 4l60e good to
- l60e to l80e what is needed
- Shift points
- stock wheel backspacing
- LS1 Stall in my truck. Will it work?
- Shift Firmness
- What kind of transmission fluid?
- ET Streets
- IAC problems
- Transmission Woes, Transgo wear?
- shifter
- new too trucks. need suspension help.
- Old School 5.3L Swap ?????
- Drop Shackles
- Driveshaft Loop (Pictures)
- I'm In The Middle Of Drop Installation And Need Help!
- 1500hd
- which shift kit?
- Eaton LSD is Awesome!
- Wide rims?
- will a 4l65e out of a SS
- Time for gears.
- lowered rcsb help
- Build up, rebuild, or replace my 4l60e?
- Thinking of switching to something between 4.10 and 4.56.
- Completely screwed...
- Questions on lowering a 4wd ecsb
- body lift
- Shocks Which type to get?
- will gears from a 2004 10 bolt fit into a 91 10 bolt?
- TransGO HD2 install - Boost valve
- Tranny using fluid, but no leaks???
- Gearin up
- Steering shaft problem..
- 2wd lift spindle ?
- Time for new Shocks??
- 4.56 or 4.11
- SSBC brake upgrade and kyb shocks?
- 2" Rear Drop & Pinion angle
- truck only revs to ~2000rpm when brake stalling
- Stall in a desert truck?
- 80e trans prob fixed!!
- Torque Converter Benefit?
- stock rear end swaps, worth it?
- U- Joints
- 1978 rearend
- Quick Question About Trans!!!!!
- dshaft clunk question
- Almost ate it brake's failed.....
- McGaughy's Air Bag Kit Question
- gears
- Quarter mile??
- Party in the back
- Another frikin pinion seal!???
- vacum mod ???????
- I blew my driveshaft! Horray!!!!!
- I hate leaf springs!
- 500+HP Tranny recommendations?
- PI Viglante/4l80e/LSx flexplate solution
- 3.23's to 4.10's = WooHoo!
- Vibration from where?
- Hangers Installed
- 6L80 info
- Brake Help
- What Type of Tranny do I have?
- Coil Spring replacement
- What exactly do you call a built 4L60E
- 4L80E infos needed
- Can you buy just the two plugs that go into the gear selector on the side of a 60e?
- How much oil in a 80e?
- So I need a new TC, Stall??
- Gearing reccomendations
- Air Bags....Can they Help Traction?
- Shift Kit Removal
- what size pinion
- New vibration with different Driveshaft.
- tranny temp problem
- Im 4WD what would I need for AWD
- harsh shifts
- need help with dropping my silvy!!......
- G80?
- 99-01 2500 - Trans & rear options
- Need some tall sticky tires....
- TCI Flexplate help
- Anyone have a machinist buddy?
- Tire ?s ( yes another tire thread )
- Need Help Fast 80e question
- Got the tranny in..
- Best street tire for stock 16in rims?
- Does anybody have pics of a tranny swap?
- Po757 Dtc
- need to fix inside wheel peel,immeadiate turn from stop,eaton/trutrac? searched alot
- Anybody replace torque converter bolts with better ones?
- 4.3 to 4.8 flywheel
- drop kit pics
- Vibration Shimmy While Towing
- Broke rear end today. Need advice quick
- Shift kit install, now no reverse?
- Bleeding the brakes!!! Need help!!!!
- Help w/traction problems
- Motive has 4.30's for the 10 Bolt Guys!!
- 4l80e valve body torque specs?
- Carrier Bearing Relocator Bracket... Worth It?
- Whats the most drop you can get on a 4wd before the CVs bind?
- 1/2ton 2wd guys with Torsion bar front ends.Adjustment info needed.
- Need advise with rear leveling kit.
- Larger Tranny Cooler
- Need Help with Drag Radials
- Rebuild or replace rear end. Please help!
- Best place to get new shocks!!!?????
- 6l80e??
- Did you know?
- inner tierods?
- I got a question!!