- Are 3.42 gears good for anything?
- Tuning Thoughts
- New guy with an LQ9...I hope
- new best et. after e-fan install
- my friends & i are havin a power pissin match...i need help
- HPtuner help needed for Whipple attn ETC
- Gears??
- Hi, Just got an SS
- what do you think
- Buy a burned motor?
- aftermarket auto trans flexplate
- Buying a burned engine?
- Torque converter question Precision or Yank
- True Dual On A 5.3
- I need more horse power
- Intake Manifolds: LS1, LS6, Or Stock Truck....
- spark plug rattle
- aftermarket or stock ecm??? wtd
- Exhaust for Envoy XL
- Vacuum port and Chiltons
- rev limiter, and shift rpm
- 2-3 shift hangs "help"
- g-tech and real track times
- Knock retard on stock denali...?
- Best air intake kit?
- weird mod question
- Need help
- best headers & x pipe
- what type of piston in 5.3?
- Weight: front and rear
- nitrou purge pic's
- Light vibration/shake through steering wheel
- Free mods?
- truck has been converted
- Best Cam for Radix????????
- 2 1/2 years of knowledge.
- Picked up a few things today to help my 5.3 breath better.
- correct/incorrect operation of a dyno?
- if bigger is better, anyone stuffed an 8.1 in a halfton
- no 4th gear after metal acc piston & billet OD servo, HELP please
- The truck has arrived. Let the mods begin!
- How much does an RCSB 2wd weigh?
- eaton magnacharger bower question
- Fuel Gauge???
- k2500 backfiring thru exhaust, please help!!
- Anyone figure out the Predator/speedo stuff
- AutoMeter Tach install
- Supermaxx/Magnaflow 1/4 Mile Results
- Which of these tachs to get for my steering pod
- Is there a parts interchange FAQ?
- 13 second club
- 5.3L Stroker
- which radix pulley
- Hit the limiter tonight...
- why not?
- 10% off all VaraRam inductions!
- granatelli question??
- Cool Turbo Link
- Newbie truck owner and a question
- It's about time for some brakes
- Need help/suggestions
- nitrous install complete
- Westers custom programming group purchase!
- what next?
- Tuning or Tranny?
- Under the knife... 408 build up started
- Got my electric fans!!
- Action plan for my truck
- roller rockers
- TRaction problem
- FYI/Traction Device inside
- Mods here tomorrow!!!!!!!!!!!
- Trailblazer Converter?
- Shock Question
- BBK Throttle body
- LS1 Edit or HP Tuners Or??
- .600 lift cam and 1.85 ratio tockers?
- Magnaflow or Corsa???
- Whats the most mph out of a single power adder truck so far?
- What truck had a manual trans? need reflash for T400 swap
- 6.0 Help?
- ok got a question for you guys
- Fuel Pump Replacement
- NEED HELP - adding wire to IAT harness
- New truck project @APE!
- stock lift and performance
- Programmers
- Muffler delete pics on the SS
- Dealer tire calibration
- What you guys think about these bars?
- new member he is my friend
- 180 thermo or 160 thermo??
- The real truck pull
- posi unit
- tdogg5.3
- ECM took the eternal dirt nap!
- DW rotors don't fit??
- Hypertech Programmer: Any Real Performance Gains w/ 87 octane?
- WTF!!!!!!! Hemi Pulled my 2500!!!!!
- Cheap man exhaust..
- HP Formula
- E-fan/Thermostat ?
- HPtuner tranny help needed. 4l80e
- Custom Tune in DFW
- LQ4 Cost...
- PCMforLess Nailed it! 99-02 PCM
- Any shop in Sac that installs edit?
- Magnuson Side mount w/Intercooler
- Finally ordered the cam......
- sparkplugs
- Vortech Super Sale - beat the price increase!
- Torque Converters
- Built Short Blocks for 8.1 496
- Hello everyone
- where is the best place to buy a posi??
- Please help with a rebuild (97 GMC Z71)
- Lsx Intake
- Need Assistance-No Heat
- Going for another dyno tune.
- mega squirt thread in the tuning section
- 6.0 for my 68 burban from E-bay
- launch technique
- HELP! Transmission failure!
- magnaflow or borla
- Gains after removing cats worth it???
- boost topping out?
- turbo boots
- WANT POWER and im a newbie
- WANT POWER and im a newbie
- Blocks the same
- transmisson question
- All this talk about HP and TQ gains..
- Question about the 4wheel drive..
- need advice with maf!!
- Pulled the heads again and got pics
- Finally got a cam
- Truck Induction Sale
- Whipple Intercooled Blowers
- What mod next?
- sputtering at WOT?
- Nelson tune
- Heads/Cam going in....it's an unusual combo so I've got a few questions
- made the switch
- LS2 + Radix
- FYI, stock HD brake/flash stall
- Need help identifying a motor 4.8 or 6.0
- Looking for more power couple Q's, T/C, cam, tune?
- Anyone throw a P0102 Code - MAF/VAF low circuit?
- Got my Kit and now I have some issues....
- tuning and warranty
- TBI swap into a carbrator, need help
- '05 drum brakes, will 15" wheels fit?
- total engine airflow
- Back from the dealership...tell me if this is right.
- Where is Blacksheep?
- Vinci / Crane Cam Tuner Combo?
- Anyone disassemble their RADIX yet?
- What air intake for whipple?
- nitro daves new kit
- Radix in tank fuel pump?
- Walbro GSS340 fuel pump installed before Radix?
- my nitrous upgrade
- Thoughts on this
- Need help with new shocks
- it didnt blow! not the numbers i was hoping for. 4.8 do suck!!
- Ls1 Vs 6.0 Liter
- Quick question about cold trans shift...
- More boost=slower times?????
- Where to buy header gaskets??
- Have a Magnaflow, but what it louder!
- Help!!!
- tunes
- Kinda of a newb question..
- Throttle body size?
- Keep throwing fault codes with new engine
- How many LQ9's with whipple?
- In the process of porting intake. Please read and respond.
- Are you feeling... lucky? (free gifts!)
- ignition timing with a radix
- Weight reduction?
- ASP pulley installed
- Turbo intercooler flow ratings? Help needed
- Got a question on stock guage cluster wiring.
- Whats lighter?
- Lq9 with non-intercooled boost
- ahhh! Lost part num for ls1 inj connectors..
- Hd 2500 Times!!!!
- C5 Cam
- Just showing off the heads/cam
- need help on 5.3 04 tune fast!
- Spark Plug Question
- New times with dry nitrous finally!
- So Truck
- Y-pipe for long tubes, how did you do it?
- Need help/ opinions
- New 65E Trans and PI TC, more mod's to come....
- Educate me on shift kits: Good or bad for the trans??
- Honest responses please: Does manually shifting my tranny cause it to die?
- Honest responses please: Does manually shifting my tranny cause it to die?
- vararam velocity stack
- 2005 Perfomance Goals
- Volant inductions on sale!
- Anybody here used B&M shift kits?
- Muffler? Magnaflow,Flowmaster....
- Newbie here and a Couple Questions
- Torqe Converter
- The Radix is fixed
- computer people. need help in here
- LLY Duramax "Tuner" testing inside.
- What is needed to make an air to water intercooler
- Joe Gibbs truck parts
- WTB - Truck slicks, 28" dia for 16" rims.
- please help with cam choice-97 GMC Z71 4X4
- What all programers can remove the TM?
- ported/polished 6.0 heads on 5.3
- New K&N FIPK for 99-03 4.8/5.3's For Sale!!
- LS1 Injectors into a 2003 5.3
- 2003 Regency 4.8 rcsb
- DIY Supercharger
- help from hp-tuners
- tune up
- th350/400 guys and 4l80e guys ??
- Looking for a truck forum covering 98's
- bought the vr stack for my dads 5.7 truck
- 04 6.0l
- 4.3 Hemi Kill
- LS1 VS LQ4 motor alone fwhp?
- May be old, but were is the best place....
- ? for guys with SS's or C3's
- Truck user list -- Temp close for update
- STS Turbo sale!
- engine coolant circuit problem?
- Eaton posi install??
- Cutout's on my SS??
- LS1 swap guys, what dyno #'s are you putting down?
- ? about the Trailblazer TC and GMpartsdiect
- Installing gauges
- brains, got one for ya
- what converter do you have
- need motor help.
- GTP S2+ pics for 02Sierraz71
- Boost
- Best Spark Plugs
- 6.0 questions...
- Flyer! This Weekend It's On!
- 5.3 in a 1994 chevy 4x4 full sized
- Anyone know a STS dealers near Wisconsin?
- Here ya go !!!
- MagnaFlow GP
- benefits of ls6 intake on our trucks.